My rear wiper motor has stopped working. I've checked the fuses and it appears to use the same one as several other things that still work so I assume that's ok. Removed the tailgate trim, and found a connector feeding a relay next to the wiper motor. But none of the colors match the wiring diagrams online or in the Haynes manual. With the switch off. I've checked with a multi meter and 2 of the pins show continuity to earth. But when I put the rear wiper switch on. They become 12v and one of the other pins seems to go to ground. And one got any ideas? It's a 2000 X reg 2.0 HDI. If that helps. Thanks