Which Stereos need iso adapters for an R reg 306 ( mark 2 )?

Discussion in 'Peugeot 306' started by boznia via CarKB.com, Apr 5, 2005.

  1. Sorry I am a newbie and have never changed a car stereo before, my clarion
    radio cassette has packed up and I am looking to replace it with a sub ?100
    cd tuner. I am thinking of the sony cdx2000, but am confused as to whether
    it will need an adaptor or not or will just plug straight in to the
    existing connectors.

    Please can you let me know which makes, if any, will work without the need
    for an adaptor.

    P.s. I have read all the posts about how impossibly difficult it is to get
    the old clarions out, and will try my luck with the offical keys which I
    bought on ebay - any hints would be useful.

    boznia
     
    boznia via CarKB.com, Apr 5, 2005
    #1
  2. boznia via CarKB.com

    Nom Guest

    All aftermarket stereos have ISO connectors. If your car also has ISO
    connectors, then all stereos will plug right in.
    The adaptor (if needed) is for the CAR side, not the stereo side !
    It's not hard at all, and you don't need any tools. There are a pair of
    removal holes - one on each side (sometimes underneath a blanking strip).
    Jam a needle/screwdriver/anything-the-right-size into the holes, and pull
    the unit out.
     
    Nom, Apr 6, 2005
    #2
  3. A phase-II 306 has 10-way ISO connectors.

    You'll probably need an adaptor for the remote stalk, and may have to
    reverse the permanent and ignition live cables (as Pugs are the 'wrong' way
    round for most HUs.
     
    southpawArcher, Apr 6, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.