What clutch type is my 406 - hydraulic or cable?

Discussion in 'Peugeot 406' started by Paul M, Mar 2, 2006.

  1. Paul M

    Paul M Guest

    Can anyone tell me which clutch type I've got or tell me how to
    identify this? It's an S reg 1.9 turbo diesel GLX saloon. I've got a
    problem with excessive travel on the clutch pedal (I have to put the
    pedal to the floor to change gear) and a fair bit of play before it
    starts to give any pressure. Any halp much appreciated.

    Cheers

    Paul
     
    Paul M, Mar 2, 2006
    #1
  2. Paul M

    Keith Willcocks Guest


    According to Haynes it is a self adjusting cable on all models except the
    2.1 litre diesel which is hydraulic.
     
    Keith Willcocks, Mar 2, 2006
    #2
  3. Paul M

    Malc Guest

    What Keith said. It's fairly obvious if you look at the clutch operating
    lever.

    --
    Malc

    "It is inconceivable that anything should be existing. It is not
    inconceivable that a lot of people should also be existing who
    are not interested in the fact that they exist. But it is
    certainly very odd."
     
    Malc, Mar 2, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 306 clutch cable too long!

  2. HELP ME!! 306 Clutch cable

  3. 205: Which hydraulic fluid for headlight-angle remote knob

  4. 405 clutch cable -- fitting advice

  5. Roof bar: what type of bolt do I need

  6. help problem what fuel type petrol or diesel for 206

  7. Replace 406 clutch cable

  8. 406 clutch cable

Loading...