Tried different ecu now some things not working

Discussion in 'General Motoring' started by Boss260, Jul 2, 2026 at 3:14 AM.

  1. Boss260

    Boss260

    Joined:
    Yesterday
    Messages:
    1
    Likes Received:
    0
    I had issues with a 2012 308 that turned out to be water in the fuse box. However I switched the ecu with another 308 I had, as apart of diagnosing the problem. After changing the ecu's back over the gear selection is not showing on the dash cluster, rear reverse sensors aren't working and auto wipers. I have check on my diagnostic tool and it is reading which gear is selected. All reversed sensors settings are turned on and working. I have checked fuses also. Thanks for reading
     
    Boss260, Jul 2, 2026 at 3:14 AM
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Things to look for when buying Pug 406 ?

  2. 306 - different vents, different heat

  3. 205 diesel hub nuts are different sizes

  4. Weight different between XU alloy & iron blocks?

  5. 110 Bhp HDi have you tried BP Ultimate and or Millers Diesel Plus

  6. Picked up a cheap temporary 309 - but with some issues. Advice if possible please.

  7. 306 xltd injector fault and some other stuff !

  8. SO passenger airbag light on, guess its a seat switch? or dirty connections. tried cleaning connecti

Loading...