towbar 307 break

[X-eliminator]

Hello,
any of you know if it's difficult to install a towbar on a Peugeot 307 Break ?

Thanks,
x-eliminator

 

[Yuting Wan]

Hello,
The tow bar installation itself is very straight forward but the wire harness is more time consuming. To make the matter worse, Peugeot Australia made the tow bar in New Zealand and the trailer connector welded on the wrong side of the towbar (left) so the wire harness made by its french counterpart would not be long enough to reach.. Hope this info helps and enjoy mucking around with Peugeot.

Tim
from Sydney

"X-eliminator" wrote:

Hello,
any of you know if it's difficult to install a towbar on a Peugeot 307

Break

?

Thanks,
x-eliminator

 

[X-eliminator]

Hello,
The tow bar installation itself is very straight forward but the wire harness is more time consuming. To make the matter worse, Peugeot Australia made the tow bar in New Zealand and the trailer connector welded on the wrong side of the towbar (left) so the wire harness made by its french counterpart would not be long enough to reach.. Hope this info helps and enjoy mucking around with Peugeot.

Tim
from Sydney

Thanks,
for your quick reply.

 

[axl]

Hello,
any of you know if it's difficult to install a towbar on a Peugeot 307 Break ?

Thanks,
x-eliminator

its easy to install it, if you have a car lift but do use the original wiring for the 307 its a bit expensive but it gives a lot less hassle.

 

[Make]

X-eliminator wrote:

its easy to install it, if you have a car lift but do use the original wiring for the 307 its a bit expensive but it gives a lot less hassle.

Do you know why there is one relay on orginal wiring?

Make