Tow Bar Wiring

Discussion in 'Peugeot 207' started by Hrccsparky, Feb 19, 2022.

  1. Hrccsparky


    Feb 19, 2022
    Likes Received:
    I’ve fitted an Anker towbar to my 207 hatchback and after speaking to a Peugeot garage asked if the 2 flying connectors within the boot close to the near side rear light cluster is where a Peugeot fitted tow bar wiring loom would plug in.
    Having been told that was correct, using a meter have tried to work out which wire does what, but failed!
    Reverted to old school method and removed the lights clusters to find the feeds that are required, but this means splitting the 7 core cable into two to run to each light cluster.
    This seems wrong, so has anyone had the same problem?
    Peugeot said that there is no UK held stock of the connector and 7 core cable that the 2 flying connectors plug into.
    Any help greatly appreciated
    Hrccsparky, Feb 19, 2022
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.