Steamy windows in 607. Down to pollen filter?

Discussion in 'Peugeot 607' started by Steve Dunn, Oct 28, 2008.

  1. Steve Dunn

    Steve Dunn Guest

    Hi,
    My windows steam up in my 607 (no, not because of that!) It does it
    more on especially cold days. My last car, a Mazda, I was told that I
    should replace the pollen/cabin filter every couple of years as this
    causes condensation.

    Is this true for the 607? If so, where is it in the car and is it a
    DIY job to replace it?

    Many thanks in advance,

    Steve
     
    Steve Dunn, Oct 28, 2008
    #1
  2. Steve Dunn

    LennyK Guest

    Hi Steve,

    I'd check that the air to the cabin is not set to be recirculated. If it is,
    then any vapour in the cabin doesn't get replaced with fresh air and the
    cold outside condenses this on the windows.

    Lenny
     
    LennyK, Oct 28, 2008
    #2
  3. Steve Dunn

    Steve Dunn Guest

    Hi Lenny,
    Thanks for the reply. The problem is the same whether the air is
    recirculated or not.
    Cheers,
    Steve
     
    Steve Dunn, Oct 29, 2008
    #3
  4. Steve Dunn

    Keith W Guest


    In that case, it might be worth checking that the fresh air is coming into
    the car and it is not stuck on recirculate. The 406 has a problem or at
    least the turn of the century ones did, where the gears from the motor that
    drives the diverter strip their teeth and, whilst it whirrs like a good'n,
    it don't actually move the flap. A give away on the 406 is that you can
    hear quiet little clicks coming from the area of the glovebox.
     
    Keith W, Oct 29, 2008
    #4
  5. Steve Dunn

    R N Robinson Guest

    If the pollen filter(s) is/are blocked, air won't be coming in.

    Ron Robinson
     
    R N Robinson, Oct 29, 2008
    #5
  6. Steve Dunn

    Keith W Guest

    Agreed. But if they aren't.......
     
    Keith W, Oct 30, 2008
    #6
  7. Steve Dunn

    Steve Dunn Guest

    Thanks Keith. My 607 is a 2002 and has a VERY similar noise - 5 or 6
    quite little 'clonks' from the glove-box area. Do you know if it's
    a DIY job to fix it?
    Cheers,
    Steve
     
    Steve Dunn, Oct 30, 2008
    #7
  8. Steve Dunn

    Keith W Guest

    I only have experience of the 406 and I found the most useful tool for this
    job was a son-in-law who was more agile than me. You have to lay on your
    back in the footwell. We removed the glovebox and were able to locate the
    motor after removing various bits and pieces. I had full instructions at
    the time from Nigel who is a very knowledgeable and helpful Peugeot mechanic
    who contributes to this group. I should add that the replacement motor was
    around £150 although later ones are a bit cheaper. In the event we left
    the flap open so that air is always coming from outside and did not replace
    the motor. In the three or four years since I have only about twice
    regretted it when following smoky, elderly Ford Fiestas.

    This link will take you to the original thread on Google Groups but you may
    do better to "Ping" Nigel and ask about the 607 specifically.
    http://tinyurl.com/658twd
     
    Keith W, Oct 30, 2008
    #8
  9. I had exactly the same problem on my 206SW and changing the air filter
    and pollen filter stopped it. I have no idea why.

    The car is 3 years old but only has 16k on the clock.
     
    Learning To Fly, Nov 1, 2008
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.