Rear beam possibly seized on one side - no shock absorbing ?

Discussion in 'Peugeot 309' started by Troy1974, Oct 30, 2019.

  1. Troy1974

    Troy1974

    Joined:
    Oct 30, 2019
    Messages:
    1
    Likes Received:
    0
    Hi
    New to the forum and 309s - wondered if I could get some advice. Picked up a nice clean low mileage 1991 309 this week - took it in for inspection and it failed and on one thing which was where the bottom Shock meets the rear beam - when the shock is compressed there’s supposed to be some swivel action going on but it’s not moving so as you can imagine it’s kind of rough riding on that side - I think there’s a bearing assembly inside the beam right ? Just wondered how simple is the procedure to rectify this issue and what parts I need Many thanks
    Troy
     
    Troy1974, Oct 30, 2019
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pulling to one side on acceleration

  2. Light steering and speedo failed & shock absorbers

  3. peugeot 405 brakes and shock adsorbers

  4. 406 1.9 Turbo Diesel Throttle Shock absorber

  5. 205 shock

  6. Alloy wheel wanted - possibly a long shot

  7. Cannot remove rear drum - 405 seized on?

  8. two Q's for one: Damp rear seats on 306 XSi, also replacing lambda sensor

Loading...