Problem replacing wiper blade

Discussion in 'General Motoring' started by Cire, Oct 31, 2006.

  1. Cire

    Cire Guest

    Is it possible to replace the wiper blade when the arm will only pull back a
    couple of inches?

    I have moved the blades from the parking position but arm on the passenger
    side pulls right back and replacement is easy, whilst the other one is of a
    different design and only allows slight movement away from the screen.

    Obviously I could remove the arm but, according to Haynes, this could
    require the use of a 'puller', which I don't have.

    So is there any little trick that I can employ and is it worth considering
    changing the arm?

    Eric
     
    Cire, Oct 31, 2006
    #1
  2. A bit more info would be helpful such as the model of Peugeot.
     
    Godfrey Wilkes, Oct 31, 2006
    #2
  3. Cire

    Cire Guest

    Yes; sorry about that.

    It is for the driver's side of a 2002 Reg 406 HDI.
     
    Cire, Nov 1, 2006
    #3
  4. Mine only lifts a little but the blade unit slides down out of the hooked
    end after you lift the lever and can be released quite easily. Looks
    harder than it is.
     
    Keith Willcocks, Nov 1, 2006
    #4
  5. Cire

    Cire Guest

    Thanks, Keith. I will have a closer look at it. Perhaps it isn't as bad as I
    think!

    I do admit to having a blank spot when it comes to changing wiper blades.

    Eric
     
    Cire, Nov 1, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.