Peugeot 406 Saloon Rear seat removal

Discussion in 'Peugeot 406' started by Tel69, Oct 26, 2008.

  1. Tel69

    Tel69 Guest

    I'm trying to remove the base of the rear seat in my 406 Saloon.
    The 2 front 10mm nuts, not a problem, but there still seems to be a
    pin either side holding it in.
    Is there some knack to getting the base out?
     
    Tel69, Oct 26, 2008
    #1
  2. Tel69

    Tel69 Guest

    Got it sorted.
    There are 2 spring locks in the middle of both the left and right hand
    sides of the base.
    You have to pull up at the back of the seat and push the rear base
    towards the back of the car on each side to get them to unlock.
    Lets say there's a knack, but when you know how to do it, it's quite
    easy to do.
     
    Tel69, Nov 5, 2008
    #2
  3. Tel69

    Keith W Guest

    Got it sorted.
    There are 2 spring locks in the middle of both the left and right hand
    sides of the base.
    You have to pull up at the back of the seat and push the rear base
    towards the back of the car on each side to get them to unlock.
    Lets say there's a knack, but when you know how to do it, it's quite
    easy to do.


    Thanks for coming back with the answer, I have made a note of it for mine.
     
    Keith W, Nov 5, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.