Peugeot 306 wiper problem

Discussion in 'Peugeot 306' started by Mark Williams, Aug 9, 2009.

  1. Mark Williams

    Mark Williams Guest

    306 Meridian Diesel

    Wipers ground to a halt yesterday.
    Got second hand motor and linkage and all works well except the hi speed
    wipe is not happening.
    When switched to that it's not working at all. All other functions OK, ie
    lo-speed, auto, single wipe.

    Any thoughts?
     
    Mark Williams, Aug 9, 2009
    #1
  2. Mark Williams

    Adrian Guest

    Presuming the switch (& relay?) are supplying power to the motor on High,
    then the motor's duff.
     
    Adrian, Aug 9, 2009
    #2
  3. Mark Williams

    Mark Williams Guest

    Could it be a relay problem?

    I presume the relay will under steering wheel in fuse box on a 306 and not
    anywhere else - presume I could identify which relay by removing relays
    until wipers don't work?
     
    Mark Williams, Aug 9, 2009
    #3
  4. Mark Williams

    Chris Whelan Guest

    Yep. You either need a wiring diagram and a multi-meter, or an auto
    electrician. ;-)

    In the absence of those, assuming that speed control is done by offset
    brush, the most likely fault is a sticking brush inside the motor.

    Can you dismantle the original one to get some clues?

    Chris
     
    Chris Whelan, Aug 9, 2009
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 306 wiper problem

  2. peugeot 306 wiper relay- where is it?

  3. Peugeot 106 Wiper fluid pump problem

  4. Problem replacing wiper blade

  5. Still having front wiper problem

  6. 306 windscreen wiper problem!

  7. 306 Wiper Problem

  8. Peugot 406 auto windscreen wiper problem

Loading...