peugeot 206 brake load sensing valve

Discussion in 'Peugeot 206' started by Keith Newton, May 23, 2007.

  1. Keith Newton

    Keith Newton Guest

    Hi, my 6 year old 206 glx 1.4cc has just failed its test on the brake load
    sensing valve linkage (seized). I know where it is and exactly what it's
    for, but how is it best to free it up?
     
    Keith Newton, May 23, 2007
    #1
  2. Keith Newton

    Chrs Guest

    spray lots of wd40, over it and move it a bout. i done one the other day
    and it passed after that.
     
    Chrs, May 24, 2007
    #2
  3. Keith Newton

    Harold Snodgrass Guest

    Where is it?
     
    Harold Snodgrass, May 26, 2007
    #3
  4. Keith Newton

    Chrs Guest

    at the rear, you will see all the pipes going to it,its about 5 inch
    sqaure.just above the rear axle.you can see the rod going into the
    unit,so you will have to get the car up in the air or at least on ramps
    or axle stands
     
    Chrs, May 26, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 306 HDI making a pinking type noise when under heavy load.

  2. Idle Control Valve

  3. Ignition on 1.6 16 valve - misfires? Ticking noise @ 2000 rpm

  4. Peugeot 306 Cabriolet 2.0 8 valve running super-rich!!

  5. Loud bang during load changes 406 Coupe

  6. peugeot 206 brake pad

  7. W Reg 306 HDi DTurbo dies under load

  8. Peugeot EP6 membrane valve cover

Loading...