Peugeot 106 quicksilver trouble!!

Discussion in 'Peugeot 106' started by Hollied, Oct 3, 2005.

  1. Hollied

    Hollied Guest

    I have an 'S' reg quicksilver and there seems to be a problem with the run
    of the engine.When driving along the revs seem to suddenly go erratically
    up and back down again so acceleration is lost.I know the cambelts due for
    changing would this maybe be to do with it?!
    I also had a new injector fitted about 9mnths ago, maybe the others need
    changing?! No idea help!
     
    Hollied, Oct 3, 2005
    #1
  2. Hollied

    Malc Guest

    I'm fairly sure your cambelt has nothing to do with the problem. If it was
    the cambelt then you'd very likely have damaged your valves by now (but I
    could be wrong). Is the throttle cable adjusted ok? My wife's 106 has just
    had a new clip fitted to the throttle cable which has increased throttle
    movement quite a bit.
     
    Malc, Oct 3, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.