P406, third break lamp

Discussion in 'Peugeot 406' started by Christian Schmitt, Dec 7, 2010.

  1. Christian Schmitt

    Christian Schmitt Guest

    Hi,

    the LEDs of the 3rd break lamp are damaged. Normally the need 2.5 Volts
    (lumiled's) and 70mA. But the resistor has just 38 ohms so they'll get
    more than 300mA. Is the current pulsed? What kind of LEDs do I have to
    replace, I found e.g. lumileds with 900mCd, kingleds for example have
    about 6000mCd. Which one is the right one?

    Chris
     
    Christian Schmitt, Dec 7, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 406 break 1.8 lamp of engine management continues burns

  2. P406 tank size?

  3. P406 brakes

  4. P406 HDi 2004. automatic lights

  5. Q: P406 BSI doubt!

  6. P406 HDI whimper belt !?

  7. P406 HDI

  8. P406 HDI

Loading...