LOSS OF POWER

Discussion in 'General Motoring' started by scott, Jul 20, 2005.

  1. scott

    scott Guest

    Hi can any one advise,got peguot 406 HDI 2000 X plate,

    I was out in the car tonight car was fine perfoming and accelerating
    well i got on to an open road put my foot down the acclerated lovely
    then got to about 80 mph the car would not then accelerate beyond this
    and it would not rev above 3000 rpm, so stopped turned round and
    headed home would not accelerate wot so ever completley flat then i
    actuaualy stopped turned of engine to visit shop came back to car it
    started first time and all is well again exclerating like it should
    and reved above 3000 rpm. Dose any one know reason for this? or is
    this a comon fault/thing . Please help if you can . thanks scott
     
    scott, Jul 20, 2005
    #1
    1. Advertisements

  2. scott

    Fusion Guest

    Seems that it got into the engine saftey mode for some reason.
     
    Fusion, Jul 22, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.