Key Fob Problem

Discussion in 'Peugeot 206' started by kevinm29829, Apr 25, 2016.

  1. kevinm29829


    Apr 25, 2016
    Likes Received:
    I recently bought a Peugeot 206 Zest 3.

    The buttons weren't working on the key fob when i bought the car. I replaced the battery this morning and the key still isnt working.

    I used a online guide and the LED isn't flashing.

    Guide I used below. I cant get part 2 to work.

    Can someone help? Thanks



    1. Ensure all doors are unlocked using the key.

    2. Press and HOLD the large plip key button while the LED flashes continuously for 20 seconds. After 20 seconds press the small deadlock button once while still holding the large button.

    3. The LED will stop flashing.

    4. Release the large button and the LED will light constantly.

    5. Press the large button once and the LED will go out.

    6. Open the door and hold the Plip key near the Ignition switch and press the large plip button once.

    7. Turn the ignition ON, wait 10 seconds and then turn the ignition OFF.

    8. After 5 seconds the Plip should now operate.
    kevinm29829, Apr 25, 2016
  2. kevinm29829

    Sez Lez

    Jan 22, 2020
    Likes Received:
    If you havent got it already fixed, maybe the micro switches dont work anymore, and may need two new micro swtches soldering onto the mini PC board. That is a very delicate operation but easie with a large magnifying glass, There are tutorial on Youtube how to do this.
    If you can get them tested with a Volt meter to see that they are still working or not, if they are ok, then the remote center locking needs syncing with the car whilst in the ignition.
    Sez Lez, Jan 22, 2020
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.