Identifying gearbox breather hole - 106

Discussion in 'Peugeot 106' started by jpug106, Mar 7, 2020.

  1. jpug106

    jpug106

    Joined:
    Mar 7, 2020
    Messages:
    1
    Likes Received:
    0
    Hi,
    I'm looking at topping up the gearbox oil on my 106 and have done a bit of reading around - I was hoping to top some up through the breather hole on the top of the gearbox, which I know isn't the best way to do it, but I'm hoping it works just for this once. I'm only thinking of putting in 0.5 litre to see if it helps with a noise I can hear, so not much danger of overfilling it. Garage recommended oil could be the culprit. I just wanted to check that I've actually found the breather hole though, and I'm not just going to be tipping oil in the wrong place! I've taken a couple of photos, does this look the right one?

    https://ibb.co/JrvbJTr
    https://ibb.co/7Jppv9m
    Thanks
     
    jpug106, Mar 7, 2020
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.