ESP / ASR Failure message following turbo replacement

Discussion in 'Peugeot 206' started by rache, Nov 18, 2014.

  1. rache

    rache

    Joined:
    Nov 18, 2014
    Messages:
    1
    Likes Received:
    0
    Hi all help appreciated!

    I've got a Peugeot 206cc (2006) and the turbo failed on it a couple of months ago.

    I got the turbo fixed as i love the car and as part of that the DPF (FAP) was removed as this appeared to be the source of the turbo failure. :(

    Since this, the car drives ok but the ESP/ASR Failure message displays and the 'skiddy car' dashboard light is illuminated.

    I've had it plugged into PP2000 and there are 2 errors as follows;

    ABS or ESP ECU: Remote permanent fault. Communication with the engine management ECU. Incorrect value received.

    ASP or ESP EUC: Permanent fault. Regulation of engine torque.

    The fault doesn't clear even when removing battery and clearing again - it remains.

    Appreciate any advice on how to fix it or what best to do.

    Thanks in advance,

    Rachel
     
    rache, Nov 18, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Anyone want the following parts before I Ebay them?

  2. 2004 206 XSi 1.6 16v - Engine Management light and Antipollution message?

  3. Peugeot 307 HDI 110 Xsi/D Turbo Error Message

  4. P reg 306 D Turbo - Turbo Replacement

  5. 406 SV ESP switches off

  6. 1997 406 2.0 petrol turbo repair/replacement

  7. 307sw 2.0 foutmelding storing esp/abs en storing snelheidsregeling

  8. Anti Pollution Fault following puddle

Loading...