Engine tempreture problem

Discussion in 'General Motoring' started by Adnan, Jun 20, 2006.

  1. Adnan

    Adnan Guest

    Hello i have a Peugeot 1.9 TD 1996 i have a major problem with my
    engine it is warming up quick and the Radiator FAN doesen't switch on
    .... :(
    I check the thermostat it is oppened on 95 C but only on lower fan
    speed ... wich is not enough to cool the engine.
    I have one datchik near to fuel filter brown on color when i take off
    the cable from the datchik FAN is start to work on Highest level and
    very quick the engine is cool down ... i check the same datchik it is
    work ... The problem is somhere else ... if anybody has the same
    problem please let me know!!!

    Thanks in advance !!!!
     
    Adnan, Jun 20, 2006
    #1
  2. Adnan

    Michael Roche Guest

    I am assuming that you have 2 cooling fans. They operate in series for low
    speed and parallel for high speed. Disconnecting the thermostat connector
    (brown) for the bitrol system should first cause both fans to operate at low
    speed and then after a short while at fast speed.
    Are both fans working at high speed as neither will work at low speed if
    they dont operate at high speed together. I have had the same problem with
    my 1.9 TD 406 and can give you some more help if required.
    Mike
     
    Michael Roche, Jun 21, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. [205] - Replacing 1360cc TU3S engine with 1.6GTi engine

  2. XU7 engine pinking problem

  3. 205 1.9 GTI Engine problem

  4. 1991 405GL Engine problem

  5. problem with fan in engine and blower fan in car

  6. Engine problem

  7. peugeot 206 engine problem

  8. Peugeot 407 Engine Engine Cease

Loading...