Broken standard Blaupunkt 2040 in the 206

Discussion in 'Peugeot 206' started by J&K, Jun 26, 2006.

  1. J&K

    J&K Guest

    Hope someone can help...
    My factory fitted radio has stopped working in my 1999 Peugeot 206 GTi.
    Thinking that the radio had finally broken, I've changed the "old"
    radio with another that I know works.
    There is power going through to both ("old" and "new") radio's once
    connected as the volume dial glows with the ignition, however both
    refuse to work.
    I've skipped through the menu of the in-dash display, and it states
    that both Radio and CDC are "out" - any ideas as what's wrong?
    Many thanks.
     
    J&K, Jun 26, 2006
    #1
  2. J&K

    mike Guest

    I have exactly the same problem on my 2000 Peugeot 206 with the same
    radio.
    When the radio "on" button is pressed the CD changer checks the CDs and
    the central display comes on (but no radio info), so something is
    working.
    Please let me know if you find anything useful!
    Regards, Mike
     
    mike, Jul 1, 2006
    #2
  3. J&K

    mike Guest

    I have fixed my radio; the fault seemed to be a software problem
    between the display and the radio.
    Remove the central display cover - lift back of cover (near windscreen)
    and unclip. Inside there's a little plug on top of display, release the
    black clip then unplug it and plug back in.The display will now go back
    to pre-set mode ie. english, french etc. Press left and right buttons
    to enter the settings you want, and you may need to enter your radio
    code (I didn't). The radio should now be back on. My CD changer then
    came on when I re-inserted the CD cassette. Good Luck!!!
     
    mike, Jul 3, 2006
    #3
  4. J&K

    J&K Guest

    Thanks for this - unpluging the central display worked and I can now
    drive around listening to my CD's instead of the sound of the engine!
     
    J&K, Jul 4, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.