Air Con Fan Not Working

[CB]

Hi,

I have a Pugeout 1.9 TD (1998 R Plate), The blower for the heater/aircon has just stopped working. Was working 100%, turned car off came back to car and it was not working at all. Fuses seem OK.

With ignition turned on, when I move the fan control slider to the full right position I can hear what sounds like a relay click, moving the slider back a little makes it click again. Totally nothing from the fan though! Any ideas?

Cheers

 

[CB]

Hi,

I have a Pugeout 1.9 TD (1998 R Plate), The blower for the heater/aircon has just stopped working. Was working 100%, turned car off came back to car and it was not working at all. Fuses seem OK.

With ignition turned on, when I move the fan control slider to the full right position I can hear what sounds like a relay click, moving the slider back a little makes it click again. Totally nothing from the fan though! Any ideas?

For the record as it were the problem above was traced to loose connections made to the resistor-block which makes up part of the heater/aircon blower-motor and fan assembly. Apparetly this is very common in pugs. A 'repair' has been made by simply 'jiggling' the wires so as to make a connection again and then securing them to prevent further movement!! Unfortunately there is no way to repair the resistor block as it is sealed.

I feel the repair was worth a try as a new fan/motor unit would cost approx £150-00 UK Pounds. Total cost of this 'repair' was £10-00 UK Pounds and is still holding after 6 days

Time will tell...