a loose breather hose

Discussion in 'General Motoring' started by Davidp1u0g6, Oct 30, 2006.

  1. Davidp1u0g6

    Davidp1u0g6 Guest

    Car is a peugeot 106 1600 8v on X reg.
    It's doing my head in, i have a breather hose of some sort floating
    around in the car and i dont know what it does or where it goes!
    well, im more concerned about what it does than where it goes, because
    i have an idea where it goes, but have no idea why its floatin around
    :)

    its black, comes from above the driver wheel arch, into the engine bay
    and is clipped ontop the black sheilding on the left hand side of the
    engine. looks identical to the fuel line that runs into the fuel rail.
    i have looked on a saxo 1.1 and it plugs into the inlet manifold, but
    my manifold is built slightly differently to the 1.1 manifold i looked
    at. my manifold has the idel valve built on the left side of the
    manifold with a pipe going behind the engine and around to the main
    inlet pipe.
     
    Davidp1u0g6, Oct 30, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Loose roof bar on 406

  2. what does this hose do? - 306 XSi

  3. 306 1.6 petrol leak - which hose?!

  4. Copper hose joiner?

  5. Heater fan works intermittently - like loose connection

  6. Peugeot 306 1.4 1998 breather hose broken?

  7. 406 2.0glx throttle housing breather hose blocking

  8. Peugeot 307CC changing loose gear knob

Loading...