605 central locking pinout

Discussion in 'Peugeot 605' started by Ívar Pétur Guðnason, Aug 29, 2006.

  1. Hi all

    I aquired a new central locking set for the 605 (1991 model). The set
    contains everything needed: 3 keys, a ignition switch, all locks, and a
    control box.
    The old control box is marked KIEKERT and has a nine pin connection. The pin
    layout is: 1 1 1 1 1 1 1 1 1 and the pins are numbered 1 to 9.
    However, the new box is marked TEXTON, and although it also has nine pins
    the layout is quite different:

    - - - - -
    - - - -

    The pins in the new box are not numbered or marked in any way that I can
    see, whether inside the box or out.

    Has anyone done this kind of connection? If I decide to take my chances and
    connect the new box according to the numbers, where can I assume that pin
    one is located? Top or bottom left?

    Thank you

    Ivar Petur
    Ívar Pétur Guðnason, Aug 29, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.