406 1.9TD engine cutting out, loosing power

Discussion in 'Peugeot 406' started by paulsolo1, Feb 16, 2004.

  1. paulsolo1

    paulsolo1 Guest

    Hi have a 406 which runs fine then will loose power and the management light comes on, if you bump it all is ok or you have to turn ignition off then on, also sometimes it will cut out when slowing down but starts at the turn of the key.
    On the Pug diagnostic it pointed to a sensor on the filter housing which was replaced and seemed to cure the problem but now it has come back.
    When changing the filter there was a little grit in the bottom of the housing not sure if it was shiney.
    Any help would be appreciated.
    Cheers Paul.
     
    paulsolo1, Feb 16, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.