406 1.9 TD 98 Rear suspension top arm bush

Discussion in 'Peugeot 406' started by Michael Roche, Jul 8, 2006.

  1. Gents
    I am getting a squeak from the rear suspension top arm bush drivers side
    when the vehicle moves. I have examines the bush using a tyre leaver and
    there is no movement just the squeak. Is there any thing I can use to
    lubricate the bush to stop the noise. I would prefer to try this first as it
    looks as though the sub frame and most of the suspension needs removing to
    get the bolt out as the bolt cannot be withdrawn without cutting it off.
    Is it possible to cut the head off the bolt and then remove and replace the
    other way around after renewing the bush without dismantling the rest of
    the suspension.
    Michael Roche, Jul 8, 2006
    1. Advertisements

  2. Michael Roche

    Chris Guest

    Spray WD40 into the bush. that dos a lot and it is very good. at
    keeping things quite.
    Chris, Jul 9, 2006
    1. Advertisements

  3. Thanks will try
    Michael Roche, Jul 9, 2006
  4. Michael Roche

    Tunku Guest

    That really only works as a temporary measure, but it will confirm where
    the squeak is coming from.
    Tunku, Jul 11, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.