306 stereo question

[James (2)]

I want to replace the my stereo in my 306 with a CD player however I still want to keep the control stick on the steering wheel. Is it possible to wire this to my new stereo or perhaps use an adapter or will it just work once the new stereo is installed?

Any help would be appreciated.

 

[steve (archive)]

you may need to check with the manufacturer of your replacement radio, i dont think many of them will be able to incooperate the column switch..... but it wont just work, you will probably need to wire it up if its even possible to do so...

 

[ML]

you may need to check with the manufacturer of your replacement radio, i dont think many of them will be able to incooperate the column switch..... but it wont just work, you will probably need to wire it up if its even possible to do so...

WWW.NEXIA.CO.UK for wiring kits. Only works on higher spec radios like Sony though.

 

[PaulC]

I want to replace the my stereo in my 306 with a CD player however I still want to keep the control stick on the steering wheel. Is it possible to wire this to my new stereo or perhaps use an adapter or will it just work once the new stereo is installed?

I've seen adaptors for Sony radios that let you keep both the control stick and the original display active, and are pretty much a plug-and-play solution.They require a Sony unit with a cd-changer and stalk interface connector on to work (which most have) -> www.connects2.co.uk

 

[The Question Asker]

Halfords do connectors for I think Kenwood and Sony stereos so u can us ethe control stick in the back, its as easy as connectinmg two plugs together

 

[Tony Evans]

I have just done the exact same thing. I replaced the original radio/cassette with a Sony radio/cd player and its fine. Total cost including fitting £150