306 Speedo, Rev Counter, & Fuel gauge all not working

Discussion in 'Peugeot 306' started by paul.treneary, Mar 5, 2007.

  1. All have just cut out - I'm assuming the petrol gauge has too as I'm sure
    there was half a tank in there a couple of days ago - gonna check that by
    buying some fuel tomorrow. What's odd is that the temp guage is fine, as are
    all the other lights/indicators, and the odometer is ticking forward at the
    correct rate.
    And it's an S plate diesel (not turbo) if that's of any use.
    thanks in advance if you have any ideas - been through the Haynse wiring
    diag but with no joy. Also it's not long had a new cambelt and tensioner -
    any proximity to cable? (not a logical assumption that the cable is gone if
    the odometer is working I know)
     
    paul.treneary, Mar 5, 2007
    #1
  2. paul.treneary

    Brian Guest

    All the fuses OK? No 2 is the instrument panel I think, depends on how many
    fuses there are.
     
    Brian, Mar 5, 2007
    #2
  3. paul.treneary

    Blobby Guest

    Had exactly the same thing happen to mine a few months ago. Unplugged the
    fuse(s) that feed the instruments (varies from model to model) waited a
    minute then put them back - been fine ever since.

    Nige
     
    Blobby, Mar 6, 2007
    #3
  4. paul.treneary

    Nigel Guest

    Try removing the shunt fuse for a few minutes with the ignition on.
    Then put it back and test the instruments. Sounds weird but it worked
    a couple of times for me.
     
    Nigel, Mar 6, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.