306 seats not catching

Discussion in 'Peugeot 306' started by Sean, May 14, 2006.

  1. Sean

    Sean Guest

    Hi all,

    I have a 3dr 306 Turbo Diesel hatchback which serves me well.

    However, if I lift up the front seats to let someone into the back, when I
    put them back down, they don't always catch. This means that the person in
    the rear gets a seat plus the weight of the person in front flying into
    their shins.

    Is this something simple that can be fixed by tightening something up, or
    would the seats need removed to replace something?

    The back seats are used rarely enough that it is sufficient for me to give
    sufficient warning to passengers, but it is annoying all the same!

    Sean, May 14, 2006
  2. Sean

    Chris Guest

    look under the seat you should see two runners one each side. put wd40
    all over the teeth that go into the holes which hold the seat.also make
    sure the lever is returning after you have covered it all in wd40.
    good luck..
    Chris, May 14, 2006
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.