306 Questions

Discussion in 'Peugeot 306' started by bossman187uk, Mar 8, 2005.

  1. bossman187uk

    bossman187uk Guest

    Hi i have a 1994 306 and have a few niggling problems i want to fix
    over easter.

    Firstly it has been leaking and i think it is due to ariel but as it
    leaked through the service light and alarm sensor area it seems to
    have damaged the alarm senser. I want to know if i can get the sesor
    curcuit from another 306 and just swap it, if i did that will it
    recognise my key or do the key and reciever have to be like specialy
    made for each other.

    Next is i recently replaced the bar that the windowscreen wiper motor
    moves to turn the 2 blades but when i use the window screen piper the
    blades go down about 6 inches then up, this meens iv had to attach
    them a lot higher than i would normally so it doesnt hit bonnet .

    next is i think my gear box is on way out as pops out of 5th gear and
    sounds dodgy, i also know clutch release bearing is on way out as can
    tell from sound. what is it gonna cost for parts n labour? is it easy
    job?

    thanks guys
     
    bossman187uk, Mar 8, 2005
    #1
  2. bossman187uk

    Andy C Guest

    1) If I remember corrctly the sensor in the roof only transmiits a signal to
    the ECU for it to decode, so should be fine staright away. if nit then
    you'll need to re-programme the keyfob which can be a 40 second job on the
    Infra red ones.

    2) Your park position isn't alligned witht the lowest point of the wiper
    circuit. strip out what you did, get the wipers to the lowest point and the
    motor to park itself then put it back together again.

    3) No idea on price.I hardly ever use a mechanic for work
     
    Andy C, Mar 19, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.