306 Heated Screen Wiring Problem

Discussion in 'Peugeot 306' started by Horny Devil, Nov 30, 2003.

  1. Horny Devil

    Horny Devil Guest

    I have a Peugoet 306 Sedan (Saloon Version), and the heated screen was
    working from time to time, now it's stopped working completely.

    I have changed the relay and the switch without success, the wire from
    the relay and to the rear screen changes colour (Red Wire/Yellow Wire)
    and I can't find the connector. Can anyone tell me where it is?

    Can you email me please, please remove the (NO-SPAM) from my email
    address if you reply.

    Thanks...

    Ian
     
    Horny Devil, Nov 30, 2003
    #1
  2. Had this problem on a Citroen ZX (Virtually The same car) and found on
    closer inspection that the silver lines on the rear windscreen had been
    broken, i went to halfrods and bought some silver windscreen paint and
    painted the lines, its a messy job but worked for me..
     
    The Question Asker, Nov 30, 2003
    #2
  3. Horny Devil

    Horny Devil Guest

    Nope... The power is not even going to the rear screen at all!...

    Checked with a test light, the relay puts the power out, but the wires
    change colour before getting to the rear screen, and there's no power.

    Nothing to do with the rear screen heating element.

    Ian
     
    Horny Devil, Dec 1, 2003
    #3
  4. Horny Devil

    Horny Devil Guest

    FIXED THE PROBLEM...

    I was right all along, it was the connector between the relay and rear
    screen that had a fault, which I found at the passenger footwell below
    the heater assembly. The wire was half out the connector.

    Ian
     
    Horny Devil, Dec 3, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.