306 1998 Fog Lights D-Shape

Hi

I have just got hold of a pair of fog lights for my 306 i have pulled of
the blank plate to find the connectors and wiring in place i have looked
in the fuse panel no luck the haynes manual says they are labelled PA2 and
PA3 they seem to go back to the car with the main wiring - Peugeot parts
dept told me the wires shouldn't be there and i require the kit

Anyone with any ideas?

AMW

 

Assuming it is wired the same as mine, then it should use fuse F6
in the passenger compartment fusebox which is 10A.
There should also be two green relays/sockets in the middle, the
top one is the fog lights, the bottom one is the electric windows.

The fog lights would normally be controlled by a switch on the
indicator stalk, which you probably won't have, but you can check
and see if the necessary wires are there on the connector block.

-Mark