206 central locking problem

Discussion in 'Peugeot 206' started by Andy \(The Fiddler\), Oct 7, 2004.

  1. Andy \(The Fiddler\)

    Andy \(The Fiddler\) Guest

    Hi,

    When using the remote or even the key (only tried driver side) both doors
    and the boot locks pop back up as if the doors are open. (W Reg 18K
    mileage.)
    Any way of diagnosing doors or boot lock actuator motor.
    Have hear it could be Wiring Loom can this bee tested, i.e., continuity or
    high resistance?

    Any Help would be appreciated as my local garage wants £200.00 to sort it.

    Andy B
     
    Andy \(The Fiddler\), Oct 7, 2004
    #1
  2. Andy \(The Fiddler\)

    sad Guest

    "> When using the remote or even the key (only tried driver side) both doors
    This happens when one lock is not engaged / fully locked. Could be a
    sticking actuator . Try a manual test of pushing down buttons on one door -
    see if it locks and then try central locking.
    Work round the doors.
    A good dose of WD40 can work wonders. Put some down the buttons and also the
    locks.
     
    sad, Oct 11, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 406 central locking problem.

  2. 206 Central Locking Problem

  3. 406 central locking problem

  4. 406 HDi Central Locking Problem

  5. 306 Central Locking Problem

  6. Peugeot 306 '96 Problem - Sporadic alarm triggered central locking failure

  7. 205 central locking actuator problem

  8. Peugeot 206 central locking problem

Loading...