206 Central Locking Problem

Discussion in 'Peugeot 206' started by JohnS, Feb 13, 2004.

  1. JohnS

    JohnS Guest

    Suffering from the bloody bouncing lock fault common to many 206's. Age of
    vehicle 4 yrs.

    Have read previously how to diagnose which lock actuator is at fault but
    can't find the thread.

    Has anyone diagnosed this problem and installed new actuators themselves?
    Costs a fortune to get the dealer involved. Can you comment on how easy this
    was or point me to site with such info.

    Thanks in advance.

    John S
     
    JohnS, Feb 13, 2004
    #1
  2. JohnS

    Shrek Guest

    try the info exchange on the following site, that's where I found out about
    mine, local bloke replaced all three locks on mine for less than £200
     
    Shrek, Feb 13, 2004
    #2
  3. JohnS

    JohnS Guest

    Thanks. This is exactly the link I recall. Guess I'm getting out my torx
    driver set again 2moro.....
    John S
     
    JohnS, Feb 14, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 406 central locking problem.

  2. 406 central locking problem

  3. 406 HDi Central Locking Problem

  4. 206 central locking problem

  5. 306 Central Locking Problem

  6. Peugeot 306 '96 Problem - Sporadic alarm triggered central locking failure

  7. 205 central locking actuator problem

  8. Peugeot 206 central locking problem

Loading...