206 central locking control unit

Discussion in 'Peugeot 206' started by AndyB \The Fiddler\, May 6, 2006.

  1. All the locks bounce open when trying to lock the car, have shorted this
    auto-unlock feature on a 306 before but cant find the unit on the 206. Any
    help appreciated

    Andy B
     
    AndyB \The Fiddler\, May 6, 2006
    #1
  2. AndyB \The Fiddler\

    Slim Guest

    Auto unlock will normall happen if one of the doors (including boot)is
    not properly shut.

    Presuming that they are, then the fault is normally one of the locks
    not telling the control unit it is shut.

    On the Cit Xantia, it was normally due to a sticky push button on the
    inside.

    Might help !!!

    Slim
     
    Slim, May 6, 2006
    #2
  3. Thanks for the pointer

    Decided to disconnect the drivers door loom, no joy, then as the boot lock is easier removed the back cover disconnected the boot locking motor and both doors worked with no problems. Cleaned and lubricated the lock with Vaseline as it has a lot of plastic bits reconnected and everything appears to work 48hrs later

    Andy B
     
    AndyB \The Fiddler\, May 7, 2006
    #3
  4. AndyB \The Fiddler\

    Balintulo21

    Joined:
    Dec 3, 2019
    Messages:
    1
    Likes Received:
    0
    Hello, why does my peugeot 206 turn on lights when I switch to ignition on??
     
    Balintulo21, Dec 3, 2019
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.