206 (2004) - ABS pump failed!!

Discussion in 'Peugeot 206' started by jcarey, May 16, 2006.

  1. jcarey

    jcarey Guest

    Having alot of problems with my peugeot 206 S (2004) it began with the
    ABS light, brake light and STOP lights staying on while driving and
    then a day later the car wouldnt start. So far we have found the ABS
    pump is burned out and needs to be replaced but we cant find out why
    the car still wont start - does anyone know is the ABS failing a
    problem with peugeots, and would this cause the car to not start?

    Appreciate any advice!!!!!

    Thanks
     
    jcarey, May 16, 2006
    #1
  2. jcarey

    G.T Guest

    Hi,
    It may have involved a major fail on the engine management bus (remember the
    2004 is fully-muxed, began with 2002 models, IIRC), puting the bus in error
    and disabling it (from my tiny knowledge of such buses [CAN, here], it is
    possible).
    Try disconnecting the battery for a couple of hours, reconnect it and leave
    the car in ignition (2nd position) for at least 10s before attempting to
    start.
    Might work. Unfortunately, I guess you will have to get the car checked
    using the diag tool.

    HTH,
    G.T
    205 Diesel & turbo-Diesel : www.205d.com
     
    G.T, May 17, 2006
    #2
  3. jcarey

    G.T Guest

    Hi,

    Any feedback on this one ?
     
    G.T, May 26, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.