205 STDT Hub Bolt Size

[Keith Richardson]

Will anybody be able to tell me what size the front wheel hub bolt is? Thank you

 

[Albert T Cone]

Will anybody be able to tell me what size the front wheel hub bolt is?

Thank you

I've just been out and measured mine (with a ruler
As near as I can tell it's 30mm. No idea about thread pitch.

 

[Carl Gibbs]

Will anybody be able to tell me what size the front wheel hub bolt is?

Thank you
Probably either 30mm or 32mm. I've had both!

 

[Keith Richardson]

I've just been out and measured mine (with a ruler
As near as I can tell it's 30mm. No idea about thread pitch.

Thank you. If I only possesed a ruler. That is my excuse for not thinking of doing that. The reason that I need the size is so I can get the nut off and take the hub carriers off to check the bearings due to very loud vibrations when turning left. Also I am getting a clicking which I know is the cv joints as both boots have come off. The next item to come off will be the dive shafts.

 

[Mindwipe (9)]

Thank you. If I only possesed a ruler. That is my excuse for not thinking of doing that. The reason that I need the size is so I can get the nut off and take the hub carriers off to check the bearings due to very loud vibrations when turning left. Also I am getting a clicking which I know is the cv joints as both boots have come off. The next item to come off will be the dive shafts.

needs 2 drive shafts then
they dont last very long with no grease i'm afraid

 

[Carl Gibbs]

needs 2 drive shafts then
they dont last very long with no grease i'm afraid

Could be 2 boots on the one driveshaft though!

Seems to be a very common problem on 205s though (driveshafts that is). Not a difficult job to change them luckily though

 

[Keith Richardson]

Thank you
Probably either 30mm or 32mm. I've had both!

Thanks for all the replys. I will change the drive shafts. Does any one know of the rough price for a pair of drive shafts?

 

[Carl Gibbs]

"Carl Gibbs" wrote:

Thanks for all the replys. I will change the drive shafts. Does any one know of the rough price for a pair of drive shafts?

Around £50 each from somewhere like Euro Car Parts