106 airbag light

Discussion in 'Peugeot 106' started by Colin Bean, Aug 9, 2004.

  1. Colin Bean

    Colin Bean Guest

    ive sin some otha posts on here bout airbag sensors but not for the 106.

    i assume its pretty much a similar sort of fing with the sensor under the
    seat.

    my prob is the airbag light flashes for a while and then just stays on.

    whats the most likely cause of this and whats the best way to fix it?

    cheers
     
    Colin Bean, Aug 9, 2004
    #1
  2. Colin Bean

    Ken Guest

    Fixed it on my 306 by soldering the wires under the seat together. Even if
    they are well twisted together or connected via some chocolate block, the
    solder will reduce the resistance and hopefully mean the light will go off.

    My dealer wanted £180 to replace all the wiring - I spent 10 mins doing the
    soldering and that was it fixed forever.

    Cheers,

    Ken
     
    Ken, Aug 9, 2004
    #2
  3. Colin Bean

    Keith Willcocks Guest

    off.

    That is exactly how the Peugeot agent fixed the same problem on my 406.
    Both sides had to be done at different times.

    Keith Willcocks
    (remove .nospam from address to reply)
     
    Keith Willcocks, Aug 10, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 406 HDI side airbag light

  2. Airbag light on

  3. Airbag Warning light

  4. 306 ('98) Airbag warning light flashes for 5 min then steady

  5. peaugeot 406 airbag warning light

  6. Flashing airbag light problem and MOT

  7. Airbag warning light

  8. Pug 106 - airbag light on

Loading...