Re-fill coolant - Special Technique due to dodgy design - 405 TD

I was reading the post below and wondered if this applied to a 95 405
TD? I was going to drain and refil the coolant system but this worries
me a bit..

"The french in there infinate wisdom built the 405 with dodgy coolant
system. There are parts of the coolant system that are higher then the
radiator filler hole When you fill your car up you have to make sure
you use a header tank and bleed the system carefully. Failure to use a

header tank and bleed properly will lead to air locks and these airlock

can destroy the engine. I am also led to believe they can give symptoms

you describe. Never encounted my them myself but i always use a header
to refill.
Have a look on http://www.andyspares.com/discussionforum/default.asp
i use it and there is loads of hints/ tips and how to's on bleeding the

405 engines plus more.


hth
si "

The link no-longer works so I can't see how it's done.

Cheers

Ian