Off/side driveshaft problem

Discussion in 'Peugeot 206' started by JeffDee, Jun 23, 2015.

  1. JeffDee

    JeffDee

    Joined:
    Jun 22, 2015
    Messages:
    3
    Likes Received:
    0
    Hi

    I've just replaced nearside wishbone and offside driveshaft on a 2004 206 sw (1.4 petrol, MA5 box).

    The driveshaft came from shaftec - having refitted everything, I find a problem - with the inner boot band clamp of all things

    The crimp on the band clamp rides too high to clear the sump flange adjacent to the shaft housing.

    My question is - is there an easy way to bring the crimp height back down without damaging the boot, or is there another workaround for this?

    Should I remove the band ( possibly voiding the warranty ) and replace with a lower profile band? If so, how to remove it without damaging the existing boot?

    Many Thanks, and hope everyone is well
    Jeff

    (2004 1.4 206 sw) 2015-06-22 15.45.24.jpg
     
    JeffDee, Jun 23, 2015
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is oil seal required when changing driveshaft on 205 diesel?

  2. front brakes seem weak after driveshaft change

  3. 306 Driveshaft noise

  4. pug 106, driveshaft

  5. Will ignoring a worn driveshaft break something?

  6. Peugeot 205 driveshaft problem

  7. side light problem

  8. 306 off side drive shaft removal

Loading...