engine wont turn over

Discussion in 'General Motoring' started by tony, Aug 13, 2003.

  1. tony

    tony Guest

    Dont know If anyones experienced this
    I changed the engine on a pug 306 1.9D T reg 1999
    its got a transponder key
    Nows the engines back in I dont seem to get any engine management
    lights
    I get the normal indicators lights etc.
    The engine wont even turn over . Has it got anything to do with the
    ecu being locked or something ?
    Any help


    cheers
     
    tony, Aug 13, 2003
    #1
  2. tony

    David McKray Guest

    Have you changed just the engine block or have you changed the ecu as well?
     
    David McKray, Aug 13, 2003
    #2
  3. tony

    yeha Guest

    Are all the plugs attached? Does the 306 have the same plugs behind
    the passenger side headlight as the 405? There is one big round plug
    and a single spade. This is the connection to the starter as I
    discovered recently after changing a 405td. Does the engine have an
    ecu or is it the traditional mechanical fuel pump?
     
    yeha, Aug 13, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. engine wont start after changing it

  2. 306 wont even turn over

  3. 306 XSI Engine Cutting Out / Over Revving

  4. 206 won't turn over

  5. 306 xsi wont turn over

  6. 1.9d won't turn over

  7. Engine wont turn over

Loading...